Oily water separator RWO OWS-COM

Buy oily water separator RWO 

Manufacturer – RWO (Germany)

Principle of operation:

Bilge waters are delivered from the bilge by an eccentric screw pump through OWS-COM, which allows to avoid emulsions, created by mixing water and oil products. At the first stage because of density difference between oil and water separation is performed directly when mixture is flowing through the open-porous type coalescing filter, smallest oil droplets are separated by the extremely oleophilic surface. This system features the outstanding efficiency of the SKlT/S oily water separator. This system features the outstanding efficiency of the SKlT/S oily water separator. The operation mode is controlled by the Bilge Alarm Monitor OMD 24. The second stage when the Adsorber elements remove all kind of hydrocarbons from the water is activated if after the first stage the oil content is higher than specified level. This system extends operating life of the adsorber.

Compliance:

• complies with 5 ppm standard
• complies with the actual IMO Resolution MEPC.107(49)
• complies with regulations of Maritime and River registers
• complies with the requirements of doctrine for the prevention of pollution of inland waterways during vessel operation RD 152-011-00

Application field:

• passenger and transport vessels, technical fleet
• plants for oily water treatment at special cleaning vessel

Dimension range and main parameters:

Data may be changed without prior notification